Troubleshooting
Still stuck after the tips below? Open a case under Support tickets or on backtrackr.app/support.html.
Song won't import
- Check that files are WAV format with one stem per file
- Ensure the bundle folder contains all stems for the song
- Verify you have enough free storage on your iPad
- Try importing from Files first to rule out cloud connectivity issues
- OnSong backup — use + Add → OnSong, not Audio folders. You get a review before anything is written. See Import from OnSong.
No audio output
- Check iPad volume and mute switch
- Verify no stems are muted in the mixer
- If using an interface, confirm it is connected and selected in audio settings
- Disconnect and reconnect USB if the interface is not detected
High DSP or CPU in the status bar
- Watch the DSP & CPU strip while playing — amber/red means the audio thread or process is busy
- Raise IO buffer or lower Meter refresh under Settings → Audio & mixer
- For live pitch/tempo on many stems, bake a New Copy for the gig
- Turn off Show system load in status bar if you do not need the readout (zero sampling cost)
Cloud import fails
- Sign out and sign back in to Dropbox, OneDrive or Google Drive
- Check your internet connection
- Ensure the file is fully synced in your cloud account before importing
Edit & tracks
- Added or replaced track not heard yet — Add+ and Replace stage files in a draft until you tap Save song. See Edit song & tracks.
- Deleted track still plays — swipe-delete only removes it from the draft until you tap Save song.
- Cannot delete a track — you cannot remove the last remaining stem in a song.
- Add+ is greyed out — the song is at the 64-track limit.
- Replace kept my mix — that is expected: Replace swaps the audio file but keeps the same track (faders, EQ, Timeline offset).
Timeline & loops
- Bars ruler / bar quant greyed — song needs a known BPM (filename, auto-detect, or typed in Edit). An empty field that only shows 120 does not count. See Tempo, key & filenames.
- Loop chip does nothing — empty slot; shell/MIDI/pedals under Performance lock; or Chase + Follow (Timeline A–L chips still arm while the drawer is open)
- Edits disappeared — drafts are cleared when you load another song; tap SAVE before switching songs
- Older iPad feels heavy — use Follow Page turn instead of Continuous modes
- See also Timeline overview and Loops A–L.
Charts
- Empty page in Live — this song has no chart yet. Open Edit → New chart, or import ChordPro / PDF in the editor. Mixed cue lists are normal.
- Follow does not move — place section markers on the Timeline Chart lane (Add or short-drag — a tap only parks the playhead) and SAVE. Manual scroll pauses follow — tap Follow again. Before the first marker the page stays on title and key.
- Cannot open the editor — turn off Performance lock.
- Chords look stretched or warped — rotate back and reopen Charts; Live relayouts on width change. Opening the song list should not change chart width.
- Tab / Guitar Pro failed — try
.gp5or.gpinstead of a GP6.gpx. There is no tab editor; Edit reopens the crop sheet. - Capo / diagrams missing after import — type the capo note in the lyrics if you need it on the page.
- Note missing in Live — empty notes stay hidden. Type something, then Save.
- No Lyrics | Score chip — that chip only appears when the song has both lyrics and a PDF.
- Live chords do not match the singer — use the Live tuningfork menu, or Settings → Charts → Follow pitch. Transpose in the editor rewrites the file (no audio).
- Double-tap does nothing — turn on Settings → Playback → Double-tap plays song, or hold the row → Play.
- See Charts overview.
MIDI issues
- No MIDI in Monitor — test on a physical iPad (Simulator disables MIDI input). Is the source app open? Check Setup for listed ports.
- Wrong song plays — check for duplicate Input mappings (amber warning on song cards). Monitor log shows which song matched.
- Select then Play loads wrong song — enable MIDI debug logging; confirm Select finishes staging before Play arrives.
- Play fails on first trigger — ensure at least one Input or Transport mapping exists so the audio engine stays warm.
- Output not received — Output power on? Check Setup routing and Receiver monitor octave alignment.
- OnSong not listed — open OnSong first, then refresh BackTrackR Setup.
- MIDI Clock silent — Send MIDI Clock on? Song BPM known? Edit → MIDI Clock not Off?
- See also MIDI connections and OnSong workflow.
Timecode & Control Track
- Loops greyed / unavailable — Chase is on and the song Timecode is Follow. See Timecode.
- Chase picks the wrong song — overlapping Follow windows; run Auto-allocate or set cue TC in-points.
- LTC meter silent — correct Audio input device / In channel? Mic permission? Engine running?
- Control cues missing after reopen — Timeline SAVE before switching songs.
- See Control Track.
Show Link
- No shows in the list — same Wi‑Fi, host tapped Share show, guest set Your name, and iOS Local Network allowed for BackTrackR.
- Guest out of sync — host should approve the join; both iPads stay in the app foreground during the test.
- Link dropped after a library switch — expected; start Show Link again from the library you perform from.
- Send to connected says stop playback — stop the song, then send again. If the link drops mid-send, it continues when the iPads connect again. See Show Link & sharing.
Playback & subscription
- Play opens a subscription sheet — start the free trial or restore purchases under Settings → Subscription. Library and Edit stay open without a plan.
- See BackTrackR Pro.
Special track routing
- Custom mute did nothing — match names must appear in the track name (Edit / filename). Customs apply after Click / Cue / SMPTE; first matching custom wins.
- Still muting every song after the gig — turn off Mute on that custom (or disable the profile) and save so the library unmutes.
- All matched tracks renamed to one label — turn off Apply strip look on that custom so mute groups keep individual track names.
- See Special track routing.
FAQ
Is BackTrackR available on iPhone?
BackTrackR is built for iPad — portrait or landscape — with a show screen sized for live performance.
What audio format do I need?
Songs are imported as multitrack bundles with separate WAV files per stem.
Do I need an audio interface?
To get the most out of BackTrackR, use a USB audio interface with an adapter so you can charge the iPad at the same time — you don’t want to run out of power mid-show. You can also run without an interface, using the iPad’s stereo out: pan click one side and tracks the other; each side will be mono. Global mute for duo/trio lineups works without extra outputs via custom profiles.
Where is my music stored?
On your iPad. See our Privacy Policy for full details on data handling.
Where can I download BackTrackR?
BackTrackR is on the App Store for iPad. The app page has the same download link.
Can I change the look of the app?
Yes. Settings → General → App → Appearance: Stage Dark (default), Classic Slate, Soft Slate, or Paper. It updates right away. See Layout presets & iPad sizes.
Can I keep more than one song library?
Yes. Settings → General → Libraries — create libraries, turn on Own settings when needed, and long-press the shell Library button to switch. See Multiple libraries.
Can multiple iPads follow one show?
Yes — Show Link under Settings → Sharing. One iPad hosts; others join on the local network. See Show Link & sharing.
Do I need a subscription?
Playback and live performance need BackTrackR Pro (free trial, then monthly or yearly). Library, Edit, and Settings work without it. See BackTrackR Pro.
What is the Timeline?
A multi-track arrangement view for waveforms, Loops A–L, Control Track MIDI cues, Chart-lane section markers and stem alignment. See Timeline overview. It is separate from Edit (metadata, track list, Timecode/Clock, New Copy, charts). See Edit song & tracks.
Is there a looper?
Yes — up to 12 fixed loop slots A–L per song, with arm/disarm, At end / Now switching, and control from widgets, MIDI or foot pedals. Unavailable while chasing timecode with Follow. See Loops A–L.
Can BackTrackR send or chase SMPTE?
Yes — bake LTC, send MTC, and chase incoming MTC/LTC. See Timecode. Optional MIDI Clock is separate tempo sync.
What is Control Track?
Timed MIDI on the Timeline. A track can send plain MIDI, or use a dashboard for Kemper, Helix, or your own buttons. See Control Track.
What is Charts?
Lyrics and chords that live in the song — a live page that can follow playback, plus an editor for text, Bars, Tab, notes and optional PDF. See Charts overview.
Is there a demo song?
Yes. Tap Download demo song on first launch, when the library is empty, or under Settings → Backup → Demo song. Demo Song 1 (~81 MB) is a full tutorial song with stems, mix, chart and timeline. See Demo song.
Can I import my OnSong library?
Yes. Library → + Add → OnSong, then pick a .backup, zip, or the OnSong Documents folder. You review lyrics, PDFs, linked audio, MIDI and setlists before anything is applied. See Import from OnSong. To keep using OnSong next to BackTrackR over MIDI, see OnSong workflow.
How do I mark a favorite song?
Hold the row → Favorite. A gold dog-ear appears. Sort → Favorites puts those songs first. See Favorites & tags.
How do I mute drums on every song for a duo gig?
Use Settings → Special track routing → Special tracks → Add custom: match the drum stem names, turn on Mute, leave Apply strip look off if you want each drum track to keep its own name, then save. That applies library-wide. See Special track routing.
How do I contact support?
Settings → Support → Contact support, or use backtrackr.app/support.html. Follow replies under My tickets. See Support tickets.