Timecode (SMPTE / MTC / LTC)
Absolute show sync for lighting, Resolume and similar — separate from MIDI Clock (tempo pulses). Globals live under Settings → MIDI & Timecode → Sync; per-song starts under Songs → Timecode (or Edit → Timecode).
Concepts
- LTC — analog SMPTE as a baked WAV stem (routed like other special tracks)
- MTC — MIDI Time Code sent live from the playhead
- Chase — incoming MTC and/or LTC selects a Follow song and seeks/plays
- Freewheel — default when chase lock is lost: keep playing (optional hard pause)
New Song, import & Follow starts
- Library → + Add → New Song creates a silent control bed (no WAV import) and places Follow start at the timeline tail (+60 s after the latest window) — ideal for Control / SMPTE-only songs.
- Imports without a readable SMPTE stem also get a tail start (same as New Song).
- Imports with SMPTE keep the decoded start when the slot is free; if another Follow song overlaps, choose New code (imported song → tail) or Move existing.
- Edit → New Copy always uses the tail (never the source song’s start).
- If a song grows past its Follow window, only that song relocates to the tail (Was/Now notice). Locked Song 0:00 blocks relocate.
Master (band → lights / video)
- Edit → Timecode: set song
0:00offset, frame rate, Follow/Off, optional Lock start. - Generate LTC → baked SMPTE stem → Save song.
- Settings → Special track routing: route SMPTE to the hardware out that feeds the desk.
- Optional: Sync → Send MTC.
- Play — LTC audio and MTC follow the locator.
If tempo or start offset changes, Edit shows SMPTE stem out of date → Regenerate. Optional idle auto-regen under Sync (skips locked / imported stems). Never auto-bakes while playing.
Chase (slave)
- Enable Sync → Chase incoming timecode.
- For analog LTC: pick Audio input device and LTC input channel (listen/tap only — not recording). Use the inline level meter to confirm lock.
- Songs with Timecode Follow match when absolute TC is inside their start→end window (or a cue TC in-point). Songs set to Off are skipped — chase ignores them and loops stay available on that song.
- Chase loads/seeks that song (works from stop). On the cue list it becomes NOW and preloads NEXT.
Use Auto-allocate on Songs → Timecode so Follow windows do not overlap. Unlocked songs move onto whole minutes. Locked songs stay, and the others go around them. A spinner shows while they move. New imports can also land at the timeline tail. Widget suffixes: LOCK / WAIT / NRDY / FREE.
Freewheel: brief TC drop clears the stale readout and keeps playing. Turn on Pause when timecode lock lost only if you want hard-slave behaviour. Pulling the whole USB interface rebuilds audio (brief gap) — pull only the LTC feed to test freewheel.
Song manager & CueSync
On Songs → Timecode: song list with start/end/fps/Follow/LTC status, Lock / Unlock all, scan imported stems, and Export CueSync… (metadata setlist JSON — no WAV).
Loops ↔ timecode
- Chase off — loops allowed on every song (even if still marked Follow)
- Chase on + song Follow — loop arm unavailable (edit regions still OK)
- Chase on + song Off — loops allowed; that song is not selected by chase
- Master (Send MTC / baked LTC) — loops allowed; wrap jumps absolute TC (lighting may rewind)
Prefer a linear song when other systems chase your absolute TC. See also Cue list and Loops A–L.