Foot pedals
Control transport and loops with Bluetooth page-turn or MIDI foot pedals. Under Settings → Pedals, pick a Model diagram and learn what each physical button sends — keyboard key or MIDI note/CC — then assign an action.
Pair & enable
- Pair the pedal in iOS Settings → Bluetooth, or connect a MIDI footswitch.
- Open BackTrackR → Settings → Pedals.
- Turn Foot pedals on (footer toggle).
- Pick your Model (diagram). Pads start empty until you learn them.
Models in the picker
- AirTurn DUO / PED
- AirTurn BT500S-2 / BT500S-4 / BT500S-6
- AirTurn QUAD 500
- AirTurn 4-switch (QUAD)
- PageFlip Butterfly
- IK iRig BlueBoard
- Other pedal — generic diagram; set Buttons (1–8) in the top bar
Hardware profile: set the pedal itself to a keyboard or MIDI profile (AirTurn App Direct / AirDirect is unavailable). iRig BlueBoard: power on while holding pad B or C for Bluetooth MIDI. You can also map transport or loops under Settings → MIDI & Timecode → Maps without using Foot pedals.
Learn each button
- Tap a pad on the diagram (or press the physical button while Settings is open — BackTrackR highlights the matching pad).
- Press that pedal once so BackTrackR captures the key or MIDI message.
- Choose an action from the list. Repeat for every pad you use.
Each pad shows what it learned. Tap a pad again to change the action or Clear that learn. Clear all wipes every learned signal (actions stay until you change them).
Learned MIDI shares the same identity as Maps and song triggers — if a message is already used, BackTrackR asks before replacing it. Latched footswitches that send note-off or CC 0 still count as one press.
Quick setup
After learning, Quick setup → Apply drops in suggested actions only — for example Cue prev / next, Play / Pause + Stop, or Play · Pause · Stop · Next. It does not guess keys for you; learn each pad first (or learn, then Apply, then tweak individual pads).
Available actions: Play, Pause, Stop, Play/Pause, Next, Previous, Loop A–L, or None. Next/Previous work on the cue list only. Loop A–L arms/disarms that slot (same as Timeline / MIDI Loops) and respects At end / Now. Next/Previous and Loop A–L are blocked under Performance lock.
Known limits
- Foreground only: Bluetooth keyboard pedals work only while BackTrackR is in the foreground (iOS limitation).
- Pedal input is ignored while a text field overlay is open.
- While Settings is open, pedals highlight diagram pads for learn — they do not run transport/loop actions. Close Settings to use them live.
- Foot pedal settings are included when you Create backup.
Troubleshooting
- No response: paired in iOS Bluetooth? Foot pedals enabled? Every pad learned? App in foreground? Text field closed?
- Double triggers: forget the device in iOS Bluetooth, factory-reset the pedal, re-pair, then re-learn.
- Keys ignored: turn off Accessibility → Keyboard → Full Keyboard Access.
- Wrong button fires: tap the pad → Clear → learn again. Check the warning if two pads share the same signal.